Lamp function: Place the light on the table or platform stably, push the lamp power to ON to power on, short touch “Power icon” switch on/off the lamp, when the light is on short touch “M” key, the light can be switched circling: “natural light – white – yellow” three modes, default light is natural light.
Adjust lamp brightness: When the light is on, long press “Power Icon” to change the brightness of light.
Timer function: In any state, long press “clock icon”, will achieve countdown function, then the light will flash two times to remind the countdown function open on, and the time is 40 minutes; If you re-press the “clock icon” it will re-clock 40 minutes, until the countdown ends, lighting will shut down automatically.
Fan function: Touch the “Fan icon” to turn on the fan, wind will blow from the light-ring. Touch again to turn it off.
Power supply: Use USB power cable and the included power plug to charge it anywhere with power.
Charge Status Indicator: When you connect the LED lamp with the 3.5mm USB jack, the red light indicator on, when it is full if charge, the red indicator is off, the green light indicator on.
- Working Voltages: DC5V
- Power Consumption: 7W
- Power Supply: Built-in Rechargeable battery or DC 5V/2A power adapter
- Light-ring indicator when turning on, charging indicator
- On/Off Mode: Capacitive touch switches
- Dimmer Mode: Touch switch with stepless dimmer
- Fan function
- Auto shutdown timer
- Light Source: light-emitting diode (LED)
- Three modes of light: Natural – White – Yellow
11. Maximum Luminance: >450LUX (measured vertically from 37cm away from the table)